Port to gpiod/gpiodevice.

grow/__init__.py

@@ -4,18 +4,28 @@ import atexit
 import threading
 import time
 
-import RPi.GPIO as GPIO
+import gpiodevice
+
+from . import pwm
+
+PLATFORMS = {
+    "Raspberry Pi 5": {"piezo": ("PIN33", pwm.OUTL)},
+    "Raspberry Pi 4": {"piezo": ("GPIO13", pwm.OUTL)},
+}
 
 
 class Piezo():
-    def __init__(self, gpio_pin=13):
-        GPIO.setmode(GPIO.BCM)
-        GPIO.setwarnings(False)
-        GPIO.setup(gpio_pin, GPIO.OUT, initial=GPIO.LOW)
-        self.pwm = GPIO.PWM(gpio_pin, 440)
-        self.pwm.start(0)
+    def __init__(self, gpio_pin=None):
+
+        if gpio_pin is None:
+            gpio_pin = gpiodevice.get_pins_for_platform(PLATFORMS)[0]
+        elif isinstance(gpio_pin, str):
+            gpio_pin = gpiodevice.get_pin(gpio_pin, "piezo", pwm.OUTL)
+
+        self.pwm = pwm.PWM(gpio_pin)
         self._timeout = None
-        atexit.register(self._exit)
+        pwm.PWM.start_thread()
+        atexit.register(pwm.PWM.stop_thread)
 
     def frequency(self, value):
         """Change the piezo frequency.
@@ -23,17 +33,15 @@ class Piezo():
         Loosely corresponds to musical pitch, if you suspend disbelief.
 
         """
-        self.pwm.ChangeFrequency(value)
+        self.pwm.set_frequency(value)
 
-    def start(self, frequency=None):
+    def start(self, frequency):
         """Start the piezo.
 
-        Sets the Duty Cycle to 100%
+        Sets the Duty Cycle to 50%
 
         """
-        if frequency is not None:
-            self.frequency(frequency)
-        self.pwm.ChangeDutyCycle(1)
+        self.pwm.start(frequency=frequency, duty_cycle=0.5)
 
     def stop(self):
         """Stop the piezo.
@@ -41,7 +49,7 @@ class Piezo():
         Sets the Duty Cycle to 0%
 
         """
-        self.pwm.ChangeDutyCycle(0)
+        self.pwm.stop()
 
     def beep(self, frequency=440, timeout=0.1, blocking=True, force=False):
         """Beep the piezo for time seconds.
@@ -67,6 +75,3 @@ class Piezo():
             self.start(frequency=frequency)
             self._timeout.start()
             return True
-
-    def _exit(self):
-        self.pwm.stop()

grow/pump.py

@@ -2,13 +2,20 @@ import atexit
 import threading
 import time
 
-import RPi.GPIO as GPIO
+import gpiodevice
 
-PUMP_1_PIN = 17
-PUMP_2_PIN = 27
-PUMP_3_PIN = 22
+from . import pwm
+
+PUMP_1_PIN = "PIN11" # 17
+PUMP_2_PIN = "PIN13" # 27
+PUMP_3_PIN = "PIN15" # 22
 PUMP_PWM_FREQ = 10000
-PUMP_MAX_DUTY = 90
+PUMP_MAX_DUTY = 0.9
+
+PLATFORMS = {
+    "Raspberry Pi 5": {"pump1": ("PIN11", pwm.OUTL), "pump2": ("PIN12", pwm.OUTL), "pump3": ("PIN15", pwm.OUTL)},
+    "Raspberry Pi 4": {"pump1": ("GPIO17", pwm.OUTL), "pump2": ("GPIO27", pwm.OUTL), "pump3": ("GPIO22", pwm.OUTL)},
+}
 
 
 global_lock = threading.Lock()
@@ -17,6 +24,8 @@ global_lock = threading.Lock()
 class Pump(object):
     """Grow pump driver."""
 
+    PINS = None
+
     def __init__(self, channel=1):
         """Create a new pump.
 
@@ -26,22 +35,19 @@ class Pump(object):
 
         """
 
-        self._gpio_pin = [PUMP_1_PIN, PUMP_2_PIN, PUMP_3_PIN][channel - 1]
+        if Pump.PINS is None:
+            Pump.PINS = gpiodevice.get_pins_for_platform(PLATFORMS)
 
-        GPIO.setmode(GPIO.BCM)
-        GPIO.setwarnings(False)
-        GPIO.setup(self._gpio_pin, GPIO.OUT, initial=GPIO.LOW)
-        self._pwm = GPIO.PWM(self._gpio_pin, PUMP_PWM_FREQ)
+        self._gpio_pin = Pump.PINS[channel - 1]
+
+        self._pwm = pwm.PWM(self._gpio_pin, PUMP_PWM_FREQ)
         self._pwm.start(0)
 
+        pwm.PWM.start_thread()
+        atexit.register(pwm.PWM.stop_thread)
+
         self._timeout = None
 
-        atexit.register(self._stop)
-
-    def _stop(self):
-        self._pwm.stop(0)
-        GPIO.setup(self._gpio_pin, GPIO.IN)
-
     def set_speed(self, speed):
         """Set pump speed (PWM duty cycle)."""
         if speed > 1.0 or speed < 0:
@@ -52,7 +58,7 @@ class Pump(object):
         elif not global_lock.acquire(blocking=False):
             return False
 
-        self._pwm.ChangeDutyCycle(int(PUMP_MAX_DUTY * speed))
+        self._pwm.set_duty_cycle(PUMP_MAX_DUTY * speed)
         self._speed = speed
         return True
 

grow/pwm.py

@@ -0,0 +1,106 @@
+import time
+from threading import Thread
+
+import gpiod
+import gpiodevice
+from gpiod.line import Direction, Value
+
+OUTL = gpiod.LineSettings(direction=Direction.OUTPUT, output_value=Value.INACTIVE)
+
+
+class PWM:
+    _pwms: list = []
+    _t_pwm: Thread = None
+    _pwm_running: bool = False
+
+    @staticmethod
+    def start_thread():
+        if PWM._t_pwm is None:
+            PWM._pwm_running = True
+            PWM._t_pwm = Thread(target=PWM._run)
+            PWM._t_pwm.start()
+
+    @staticmethod
+    def stop_thread():
+        if PWM._t_pwm is not None:
+            PWM._pwm_running = False
+            PWM._t_pwm.join()
+            PWM._t_pwm = None
+
+    @staticmethod
+    def _add(pwm):
+        PWM._pwms.append(pwm)
+
+    @staticmethod
+    def _remove(pwm):
+        index = PWM._pwms.index(pwm)
+        del PWM._pwms[index]
+        if len(PWM._pwms) == 0:
+            PWM.stop_thread()
+
+    @staticmethod
+    def _run():
+        while PWM._pwm_running:
+            PWM.run()
+
+    @staticmethod
+    def run():
+        for pwm in PWM._pwms:
+            pwm.next(time.time())
+
+    def __init__(self, pin, frequency=0, duty_cycle=0, lines=None, offset=None):
+        self.duty_cycle = 0
+        self.frequency = 0
+        self.duty_period = 0
+        self.period = 0
+        self.running = False
+        self.time_start = None
+        self.state = Value.ACTIVE
+
+        self.set_frequency(frequency)
+        self.set_duty_cycle(duty_cycle)
+
+        if isinstance(pin, tuple):
+            self.lines, self.offset = pin
+        else:
+            self.lines, self.offset = gpiodevice.get_pin(pin, "PWM", OUTL)
+
+        PWM._add(self)
+
+    def set_frequency(self, frequency):
+        if frequency == 0:
+            return
+        self.frequency = frequency
+        self.period = 1.0 / frequency
+        self.duty_period = self.duty_cycle * self.period
+
+    def set_duty_cycle(self, duty_cycle):
+        self.duty_cycle = duty_cycle
+        self.duty_period = self.duty_cycle * self.period
+
+    def start(self, duty_cycle=None, frequency=None, start_time=None):
+        if duty_cycle is not None:
+            self.set_duty_cycle(duty_cycle)
+
+        if frequency is not None:
+            self.set_frequency(frequency)
+
+        self.time_start = time.time() if start_time is None else start_time
+
+        self.running = True
+
+    def next(self, t):
+        if not self.running:
+            return
+        d = t - self.time_start
+        d %= self.period
+        new_state = Value.ACTIVE if d < self.duty_period else Value.INACTIVE
+        if new_state != self.state:
+            self.lines.set_value(self.offset, new_state)
+            self.state = new_state
+
+    def stop(self):
+        self.running = False
+
+    def __del__(self):
+        PWM._remove(self)

pyproject.toml

@@ -36,8 +36,10 @@ classifiers = [
     "Topic :: System :: Hardware",
 ]
 dependencies = [
-	"ltr559",
-	"st7735>=0.0.5",
+    "gpiodevice",
+    "gpiod>=2.1.3",
+	"ltr559>=1.0.0",
+	"st7735>=1.0.0",
 	"pyyaml",
 	"fonts",
 	"font-roboto"
@@ -121,5 +123,11 @@ ignore = [
 
 [tool.pimoroni]
 apt_packages = []
-configtxt = []
-commands = []
+configtxt = [
+    "dtoverlay=spi0-cs,cs0_pin=14" # Re-assign CS0 from BCM 8 so that Grow can use it
+]
+commands = [
+    "printf \"Setting up i2c and SPI..\\n\"",
+	"sudo raspi-config nonint do_spi 0",
+	"sudo raspi-config nonint do_i2c 0"
+]

tests/conftest.py

@@ -18,31 +18,20 @@ class SMBusFakeDevice(MockSMBus):
 @pytest.fixture(scope='function', autouse=True)
 def cleanup():
     yield None
-    try:
-        del sys.modules['grow']
-    except KeyError:
-        pass
-    try:
-        del sys.modules['grow.moisture']
-    except KeyError:
-        pass
-    try:
-        del sys.modules['grow.pump']
-    except KeyError:
-        pass
+    for module in ['grow', 'grow.moisture', 'grow.pump']:
+        try:
+            del sys.modules[module]
+        except KeyError:
+            continue
 
 
 @pytest.fixture(scope='function', autouse=False)
 def GPIO():
-    """Mock RPi.GPIO module."""
-    GPIO = mock.MagicMock()
-    # Fudge for Python < 37 (possibly earlier)
-    sys.modules['RPi'] = mock.Mock()
-    sys.modules['RPi'].GPIO = GPIO
-    sys.modules['RPi.GPIO'] = GPIO
-    yield GPIO
-    del sys.modules['RPi']
-    del sys.modules['RPi.GPIO']
+    """Mock gpiod module."""
+    gpiod = mock.MagicMock()
+    sys.modules['gpiod'] = gpiod
+    yield gpiod
+    del sys.modules['gpiod']
 
 
 @pytest.fixture(scope='function', autouse=False)
@@ -55,13 +44,13 @@ def spidev():
 
 
 @pytest.fixture(scope='function', autouse=False)
-def smbus():
-    """Mock smbus module."""
-    smbus = mock.MagicMock()
-    smbus.SMBus = SMBusFakeDevice
-    sys.modules['smbus'] = smbus
-    yield smbus
-    del sys.modules['smbus']
+def smbus2():
+    """Mock smbus2 module."""
+    smbus2 = mock.MagicMock()
+    smbus2.SMBus = SMBusFakeDevice
+    sys.modules['smbus2'] = smbus2
+    yield smbus2
+    del sys.modules['smbus2']
 
 
 @pytest.fixture(scope='function', autouse=False)

tests/test_lock.py

@@ -1,7 +1,7 @@
 import time
 
 
-def test_pumps_actually_stop(GPIO, smbus):
+def test_pumps_actually_stop(gpiod, smbus2):
     from grow.pump import Pump
 
     ch1 = Pump(channel=1)
@@ -11,7 +11,7 @@ def test_pumps_actually_stop(GPIO, smbus):
     assert ch1.get_speed() == 0
 
 
-def test_pumps_are_mutually_exclusive(GPIO, smbus):
+def test_pumps_are_mutually_exclusive(gpiod, smbus2):
     from grow.pump import Pump, global_lock
 
     ch1 = Pump(channel=1)
@@ -29,7 +29,7 @@ def test_pumps_are_mutually_exclusive(GPIO, smbus):
     assert ch3.dose(speed=0.5, blocking=False) is False
 
 
-def test_pumps_run_sequentially(GPIO, smbus):
+def test_pumps_run_sequentially(gpiod, smbus2):
     from grow.pump import Pump, global_lock
 
     ch1 = Pump(channel=1)

tests/test_setup.py

@@ -1,7 +1,7 @@
 import mock
 
 
-def test_moisture_setup(GPIO, smbus):
+def test_moisture_setup(gpiod, smbus2):
     from grow.moisture import Moisture
 
     ch1 = Moisture(channel=1)
@@ -15,7 +15,7 @@ def test_moisture_setup(GPIO, smbus):
     ])
 
 
-def test_moisture_read(GPIO, smbus):
+def test_moisture_read(gpiod, smbus2):
     from grow.moisture import Moisture
 
     assert Moisture(channel=1).saturation == 1.0
@@ -27,7 +27,7 @@ def test_moisture_read(GPIO, smbus):
     assert Moisture(channel=3).moisture == 0
 
 
-def test_pump_setup(GPIO, smbus):
+def test_pump_setup(gpiod, smbus2):
     from grow.pump import PUMP_PWM_FREQ, Pump
 
     ch1 = Pump(channel=1)